|In The Pits Forum Board
|406, 434, 436, Dart lil M, Fast shafts, BSB, Chevelle A arms
|Page 1 of 1|
|Author:||Dirtys [ May 25th, 2016, 9:08 am ]|
|Post subject:||406, 434, 436, Dart lil M, Fast shafts, BSB, Chevelle A arms|
LOCATION is HUMBOLDT, KS
Sold Mod and late model just cleaning out some of my motor parts. ONLY trades I'm whiling to look at 604 crate stuff of utility type 4 wheelers.
406 Kit Eagle 4340 3.750 stroke 400 mains STD weight crank STD rods and mains Eagle 6" H beams .030 mahle flat top pistons. KIT IS USED has been internally balanced have balance sheet. everything is been checked out buy machine shop. Have new coated bearings and rings for it $1400.00.
434 Kit Callie's 4340 4" stroke 4340 crank 400 mians .10 rods .20 mains Diamond forged dome pistons .030 bore. Eagle 6" H-beam rods 7/16 cap screws. Kit is a used kit don't have bearings but can get for additional $$. Has been balanced together. $1500.00
436 Kit. Ohio crank 4340 4" stroke 400 mains, Eagle 6" 7/16 cap screw stroker clearance rods, mahle .040 flat tops. KIT is brand new never been ran. Been balanced have bob weight sheet new rings and bearings. $1900.00
Have a new set of ROSS dome pistons STD bore 4" stroke 6" rod pistons and rings. $650.00
Have a new dart block part number #31152211 Little M 400 mains 4.118 bore never had any machine work done to it. $2000.00.
Edelbrock Performer ESP #2701 brand new bolted on but never ran. IMCA legal. $125.00
Edelbrock Performer #2101 used but in good shape $100.00
2" fast shafts; 1 new carried as a spare no yoke its 32 1/2 inches $85.00
1 used no yoke 30 1/2 inches. $65.00
Two Chevelle left side A arms. 1 is stock aftermarket southwest speed with new bushings and ball joints $125.00
1 is stock with orignal bushings and ball joint. $50.00
1 BSB J bar pinion plate J bar mounts both sides of the pinion. $50.00
Call or text me 620/212/5348.
|Page 1 of 1||All times are UTC - 6 hours|
|Powered by phpBB® Forum Software © phpBB Group